North America |
Log Into Your Account
Go to Magellan Active
Manuals and Software Downloads
Warranty, Repairs & Returns
Magellan 60-Day Map Guarantee
to ensure that your RoadMate is running the latest software.
Search Support Center:
-- Entire Support Site --
Knowledgebase and FAQs
Downloads and Manuals
How do I configure my eXplorist GPS receiver to output NMEA data?
For eXplorist GC 110, and 310 models follow these steps:
"ENTER" is performed by pressing down on the Joystick)
Press the Menu key.
Under Connectivity, select Mode and change it from Power Only to NMEA USB.
You will see two additional options. Select the Text option and change it to 2.1GSA. The Baud rate option should already be set to 4800 BPS.
Connect to a PC. You will see a Connect to PC screen prompt. Select Power Only Mode to enable the GPS output.
For the rest of the eXplorist line take the following steps:
With the receiver on and the Map screen displayed, tap on the map.
The Four-Corner Menu screen is displayed. Select the Main Menu button in the lower left corner.
Select the Tools icon (wrench/screwdriver) at the bottom of the display.
Under Connectivity select Mode and change it from Power Only to NMEA USB.
You will see two additional options. Select the Tex option and change it to 2.1GSA. The Baud rate option should already be set to 4800 BPS.
Connect to a PC. You will see Connect to PC screen prompt. Select “power only mode” to enable the GPS output.
The GPS NMEA position output will only appear when the GPS NMEA settings are turned on and when the GPS receiver has a position fix. This can be identified by observing blue signal bars in the upper right hand corner of the map screen.
08 Feb 2012 7:46 PM
This article was helpful
This article was not helpful
How can we improve this article?
If you would like to comment on this entry, please use the form below. Comments may be queued for moderation, and will not be published until approved.
Image verification required
Please enter the characters that appear to the right in the space provided. This is just to verify that you are a human.
E-mail Address: (optional)
Kayako Skin by SupportSkins.com
Become a Reseller
In the News
Tradeshows and Events
©2016 MiTAC International Corporation All rights reserved.